Laboratory Centrifuge Model DR1378 M

General Parameters of DR 1378 M

  • General Purpose Bench Top Laboratory Centrifuge Machine.
  • Heavy duty C.R.C. construction finished with powder coating.
  • Double walled ABS injection moulded lid which is light weight to avoid accident.
  • Inter lid lock and metallic centrifuge bowl for safety.
  • 2 lines of 16 character LCD display of r.p.m., R.c.f, set time and run time
  • Microprocessor based programmable speed control from 500 to 5200 r.p.m depending upon the type of rotor and Digital timer (0-59 minutes)
  • Last test parameter recall and display automatically on LCD.
  • Low noise, smooth and soft start and stable Speed output.
  • Wide variety of rotors and reduction adopters available on demand at extra cost.


  • The lid is light in weight to avoid accident due to heavy weight metallic lids during operations
  • Very stable and low noise
  • No vibrations
  • Motor fitted on anti vibration spring pads. Supported with rubber covering from inside and outside.


Technical Parameter

Max. Speed 5250 r.p.m.
Max. RCF ‘g’ 3600
Max. capacity 400 ml.
Motor Universal Motor (fitted with carbon brushes)
Power AC 220V 50 Hz ±10%
Dimension of Machine: L = 415mm, W = 360mm, H = 305mm
Dimension of outer box. 510 x 510 x 390 mm
Nett Weight 21kg. Approx. Gross Weight with box = 23.5Kg


Price of machines are without Rotor Head which can be selected by customer as per their specific requirement from variety of rotors as under at extra cost:

Rotor Type Rotor Capacity Speed R.P.M Max R.C.F. ‘g’
• Swing Out 16x15ml. 4400 2750
• Swing Out 12x15ml. 4400 2750
• Swing Out 8x15ml. 5200 3000
• Swing Out 6x50ml. 4000 2850
• Swing Out 4x50ml. 4400 2750
• Angle Heads 16x15ml. 5250 3600
• Angle Heads 12x15ml. 5250 3600
• Angle Heads 8x15ml. 5250 3600


Head Type Rotor Capacity Speed R.P.M Max R.C.F. ‘g’
• Angle Heads 6x50ml. 5250 3600
• Angle Heads 4x50ml. 5250 3600
• Angle Heads 4x100ml. 4000 2850
• Angle Heads 24x15ml. 4000 2850
• Angle Heads 24 Vacuutainers. 4000 2850
• Angle Heads 32 tube of 12×75 mm 4000 2850
• Angle Heads 12×100 mm of Borosil for serum separation 4000 2850

The above mentioned rotor heads are completed with S.S. tube carriers, suitable Glass/PVC centrifugal tubes, head puller, spanner and rubber cushions.

 i) The speed of the machine depends upon the type of rotor being used. If rotor is heavy the speed will reduce as per above mentioned table.
ii) This is our general purpose leaflet. We can amend technical features according to the requirement of customer but with our prior consent on our letter head.

Your custom content goes here. You can add the content for individual product

Back to Top