Laboratory Centrifuge Model DR24BL


  • High speed, high capacity bench top, Laboratory Centrifuge Machine, Microprocessor based
  • Heavy duty C.R.C. construction finished with powder coating
  • Stainless Steel centrifugal bowl for extra protection and easy cleaning.
  • Fitted with well balanced brushless motor with electronic drive. Digital timer 0-99 minutes.
  • 4 lines 20 characters LCD display for set time, run time, set & run rpm, rcf and rotor identification.
  • 50 programmes can be stored in memory and automatic rotor identification on display.
  • Additional electronic lid lock who does not allow to open lid when machine is running and opens automatically after centrifuge time is over.
  • Dynamic brake (automatic) and imbalance detector are provided.
  • Fast spin option. Selection of 3 acceleration + 4 deceleration profile.
  • Programmable Speed Regulator from 2000 to 20000 in interval of 100 rpm
  • Last test parameter recall and displays automatically on LCD
  • Supply completed with instruction manual, cord & plug to work on 220 volts 50Hz A.C.
  • Machine comes without rotor heads.

Technical Parameter

Max. Speed 20000r/min.
Max. RCF 27800xg
Max. Tube Size 100 ml.
Max. Capacity 400 ml.
W x D x H 400 x 500 x 455mm.


Optional Heads as per customer requirement at extra cost :

Capacity Type of Rotor Type of Speed (RPM) Container RCF ‘g’
12 x 1.5/2 ml Angular Plastic 20000 27800
24 x 1.5 ml Angular Plastic 16000 22240
12 x 15 ml Angular Plastic 16000 22240
8 x 25 ml Angular Plastic 16000 22240
6 x 50 ml Angular Plastic 16000 22240
4 x 100 ml Angular Plastic 14500 20155

All the above stated heads are supplied with P.P. Centrifuge Tubes, Head Puller, and Spanner. The 2ml rotor comes with adopters to accept eppendroff tubes of 0.2/0.5ml

i) The speed of the machine depends upon the type of rotor being used. If rotor is heavy the speed will reduce as per above mentioned table.
ii) This is our general purpose leaflet. We can amend technical features according to the requirement of customer but with our prior consent on our letter head.



  • Rotor Head are manufactured from speed grade aluminum which can withstand high speed.
  • Very stable
  • No vibrations
  • Motor fitted on anti vibration springs supported with rubber covering from inside and outside.



Your custom content goes here. You can add the content for individual product

Back to Top